YX25-205-1050High Speed Roofing Roll forming machine

Detailed Product Description

Composition of machine

Roll forming main machine1 unit

Manual Uncoiler 1 unit

Control panel..1 unit

Hydraulic station 1 unit

Manual out table .2 unit

Spare tools...one box

: Details of each composition

A: Roll forming main machine

1: Coil width: 1250mm   effective width: 1050mm

2: working speed: 30m/min (not contain cutting)

3: roll station: 18stations

4: material of roller: Cr45 steel, polished and coated with chrome

5:material of main shaft:45forge steel   diameter roller: 85mm

6: main power: 7.5KW machine adopt servo motor.  

7: forming thickness: 0.4mm0.8mm color steel and galvanized steel

8: Transmission: by single Chains 1.2 inch

9: feeding and guide: surface polished and coated with chrome

10: machine adopt protect cover

11: machine adopt new station with chrome (at the up of each station have dial)

12: size of machine: 9000x1400x1200(mm)   L x W x H need 1x40GP container

13: weight: about 6500Kgs

14: color of machine: blue

15: machine should be with four legs (made from metal) in 350mm

16:  Cutting:  

(1)   Motorized Pre-cutting: It is used when changing the coil of raw material; it can cut the coil rapidly and time-saving.

(2)   Hydraulic Cutting after forming: Cut the sheet after roll forming to required length

(3)   Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.

(4)   Material of blade: CR12with heat treatment

(5)   Length measuring: Automatic length measuring

(6)   Tolerance of length: +/- 1.5mm

B.  Uncoiler

Dimensions: 1700mm*1000mm*800mm

Width of feeding: 1250mm

Capability: 5 Ton

Inter diameter: 610mm

Mode of expand &fight: inner expand &fight by manual

Way of feeding: manual

C: Control panel Panasonic

(1)   Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase

(2)   Automatic length measurement:

(3)   Automatic quantity measurement

(4)   Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved

(5)   Length inaccuracy can be amended easily.

(6).  Control panel: Button-type switch and touch screen

(7)   Unit of length: millimeter (switched on the control panel)

D: Hydraulic station   

1: hydraulic station power: 5.5kw

2: hydraulic pressure: 12Mpa

E: manual out table:

(1)Jointed by 60mm*40mm tube

(2)Size: 1.5m long*0.8mwide*0.6-1mhigh

(3)One out table with two support roller